The fundamental principle of the magnetic bending machine is that it uses an electromagnetic clamp rather than a mechanical clamping system.
The machine consists of a long electromagnet with a steel clamp bar located above it. Sheet metal is clamped between the two by an electromagnet capable of clamping with a force range of between 3-6 tons. Rotating the bending beam then forms the bend as the sheet is bent around the front edge of the clamping bar.
There are 4 different types of clamping bar used to form different folds.
Model | MB625 |
Max. Capacity | 625 x 1.6mm |
Length x Thickness | 2x16ga |
Clamping Force | 3Ton |
Duty Cycle | 30% |
Back Gauge | 390mm |
Foot Switch | Standard |
Nominal Current | 4Amp |
Protection | Thermal Cut-Out 70° |
Bending Edge Length | 670mm |
Distance between Lifters | 630mm |
Machine Dimensions (L x W x H) | 780 x 850 x 935mm |
Net Weight | 102kg |
