Our UG series cylindrical grinders feature an interver workhead, internal grinding attachment, and wheel dismount tool.
Model | UG50 x 2000 |
Distance between Centres | 1500/2000/3000mm |
Centre Height | 270mm |
Dia. Ground (O.D) | 25-500mm |
Dia. Ground (I.D) | 30-200mm |
Max. Length Ground (O.D) | 1500/2000/3000mm |
Max. Weight of Workpiece | 1000kg |
Workhead |
|
Workhead Swivelling Angle | +90° |
Centre Taper | 6MT |
Spindle speed | 50HZ:20-224 r/min |
Wheelhead |
|
Wheel Spindle speed | 1330/665r/min |
Wheelhead Rapid travel | 100mm |
Max. Travel | 250mm |
Swivelling Angle | -30° |
Hand Feed Per. Rev. | Rough: 4mm Fine: 0.5mm |
Hand Feed Per. Gra. | Rough: 0.02mm Fine: 0.0025mm |
Wheel Size (OD x W x ID) | 500 x 75 x 305mm |
Peripheral Velocity | 35m/s |
Internal Grinding Device |
|
Spindle speed | 7000r/min |
Dimension of Wheel | Max: 175 x 32 x 32mm Min: 30 x 25 x 10mm |
Table |
|
Hand Feed Per Rev. | 5mm |
Longitudinal Speed Range of Table | 0.1-3m/min |
Tailstock |
|
Centre Taper | MT6 |
Quill Travel | 70mm |
Motor |
|
Wheelhead Motor power | 7.5kW |
Workhead Motor power | 4kW |
Oil Pump Motor power | 1.1kW |
Coolant Motor power | 0.2kW |
Dimensions |
|
Packing dimensions | 5000/6000/8200 x 2600 x 2100mm |
Gross Weight | 9.6/11/14.5T |
Standard Accessories
• 3 Jaw Chuck
• Periperal Wheel Dresser
• Coolant System
• LED Light
• Grinding Wheel
• Open Type/Closed Steady Rest
• Balancing Stand and Arbor
• Extractor
• Drive Dog
• Centre
• Levelling Wedge
• Inverter Workhead
• Internal Grinding Attachment
• Wheel Dismount Tool
• Hydraulic Tailstock
• Front Guard With Interlock
Optional Accessories
• Magnetic Filter System
• 50L Paper Filter with Magnetic Separator and Coolant
• 100L Paper Filter with Magnetic Separator and Coolant
• 2 Axis DRO
• Radial Dresser
• End Dresser
• Half Center
